D-Link DCS-932L Securicam Wireless N Home IP Network Camera with Infra Red

Posted by Ub3rG33k on Sep 4, 2012 in Tech

Along with the DCS-930L camera, I bought one of these too. The only difference I can see is the option for night vision mode, and it’s double the price.

I configured this along side of the DCS-930L, and had the same ‘issues’, however this was mainly down to out of date Mac software.

The configuration was almost idential apart from the fact I had the night vision option. This give you the option of Auto, manual, or you can set the times you want it to switch from night to day mode.  Essentially the 4 night vision LED’s fire up and the video output turns to black and white.

As a test I positioned this camera on my bedroom windowsill and pointing it at the drive. While the sun was up, this worked great, however once the night vision kicked in, all I got was the reflection in the glass of the night vision LEDs. If I want to monitor the outside of the house, I think I’m going to have to get an external camera.

Although this is practically identical to the DCS-930L I think the night vision functionality is definitely worth the extra £30, and I’ll probably get a couple more of these to protect my house.

As I’ve covered pretty much all of the functionality on the DCS-930L review, there’s not a lot more to say.

As always, the unboxing pics are below.

(untitled) (untitled) (untitled) (untitled)


Tags: , , , ,


Hackingtosh FTW

Posted by Ub3rG33k on Aug 27, 2009 in Apple

A couple of years ago I discovered, it was possible to run the mighty Mac OSx operating system on hardware that wasn’t Apple.Picture 1

As the versions of Mac OSx have come out, newer of the custom install disk have been released, the community has grown, and custom drivers have been written for the non-Mac hardware.

Over the last 2 years, I’ve tried multiple disk and had varied success….however, I’ve finally cracked it ! Last week, using the disk iATKOS_v7, and after 6 attempts, I was finally able to install, and run Mac OSx version 10.5.7.

The issue that I’ve had over the past couple of years, is that Apples tend to run on the Intel based chipset and processors, but as you can see from the below, my machine couldn’t be much further from a mac specs. Having an AMD Processor and ATI motherboard was the probable cause for my 2 years of failing.

Current Machine Spec.

AMD 6000+ Processor
4Gb Ram Memory
1 x 500Gb Western Digital Drive (SATA)
2 x 250Gb Western Digital Drives (SATA)
ATI HD2900 1Gb PCI-e Graphics
Asus M2R32-MVP :-
Onboard AL1988 SoundCard
ATI SB580 Chipset
Marvell Yukon 88E001 Gigabit Network Controller


Acer AL2216W Monitor
Acer AL1916 Monitor
Logitech G15 Keyboard
Razer CopperHead Mouse

I had to switch out the DVD drive, as this caused problems with earlier version of the DVD, where I would get a kernel panic while trying to initialize the setup.

Anyway, back to the success story. The iATKOS_v7 DVD booted like a charm and took me into the setup, went into the Disk Utilities and Erased my drive to Mac OS Journal

Back to the installer, next, next, next and Customize.

On the working attempt I selected

Voodoo kernel 9.7.0
AMD Chipset Drivers
Azalia Audio drivers

that was it.

The previous attempts, I used the ATI Video drivers, the Marvell Yukon Network drivers, but no joy.

Once the install had finished, I was presented with the standard OSx welcome screen, entered my name. Due to having no working network card, I had to manually enter my details, as these would have otherwise been populated with the associated details on my apple account, after these Tada ! MAC OSX Desktop.

The video was only in 1024×768 and the was no network but we were getting there.

Downloaded the Marvell Yukon Driver from here, and followed the instructions

Downloaded the ATI HD2900 from here and followed the instructions.

Restarted, and I had full working gigabit network, and my 22″ Widescreen monitor running at 1680×1050 and 19″ monitor running at 1280×1024 !

As I was feeling brave, I decided to click on the Software update version, it downloaded and installed all the updates, and even took me to version 10.5.8 !

To get the LCD working on the Logitech G15 Keyboard, Logitech are kind enough to provide Mac Software found here , As my keyboard is a Microsoft UK layout, the ” and the @ were in the wrong place, so downloaded the Microsoft British driver from here

Finally, I couldn’t get used to the acceleration Apple implement to their mouse drives, and wanted to have the old boring 1:1 ratio, no matter how fast I moved my mouse, I found a little util called SteerMouse, which can be downloaded from here

All in all, that’s it, I now not only have my MacBook Pro, I also have a fully working Mac Pro.

Below is a list of useful software I’ve found

Adium for all your instant messenger needs
MenuMeters for all your monitoring needs
NeoOffice, a Mac only version of Open Office
Skype, mac version

Hope this was of some help to somebody.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Copyright © 2019 UB3RG33K All rights reserved. Theme by Laptop Geek.